DESCRIPTION
How can you miss the trending fashion of cross-element this summer? The brand new Cross Earrings in 925 Sterling Silver (with Two-Row Gems) are here for you! Made with tension setting, the cross hoop earrings were traced with two rows of round cut CZ stones, which maximizes light return from the top of the stone and adds more sparkles to it. Wrapping snuggly around your earlobes, these chic hoop earrings are comfortable for your everyday wear.
Stone Type: Cubic Zirconia stones
Stone Cut: Round
Stone Setting: Tension
Height: 25mm
Width: 14mm
Weight: 7.36g
Brand: APORRO
EXCHANGES & RETURNS
SHIPPING
ORDER & PAYMENT
-
NECKLACES VARY BY LENGTH AND CAN BE CHOSEN TO REFLECT PERSONAL PREFERENCE OR STYLE.* For Chokers, Add Two Inches To Whatever Your Neck Measurement Is For A Comfortable Fit.SHOP NECKLACE>>>
* Adding Four Inches To Your Neck Measurement Will Give You A Good Length For An Average Necklace, Like A Pendant. -
INCH CM 6 15 6.5 17 7 18 7.5 19 8 20 8.5 22 9 23 9.5 24 10 25 US DIAMETER CIRCUMFERENCE 5 15.8 mm 49.6 mm 6 16.5 mm 51.8 mm 7 17.2 mm 54 mm 8 18.2 mm 57.2 mm 9 19.1 mm 60 mm 10 19.8 mm 62.2 mm 11 20.6 mm 64.8 mm 12 21.6 mm 67.9 mm 13 22.3 mm 70.1 mm 
STEP 1: OPEN AND PRINT PDF IN 100% SCALEStart with opening the pdf file which you find when clicking the 'Ring Measuring PDF'. Make sure the pdf is scaled 100% and then print it. Ring Measuring PDF
STEP 2: CHECK THE PRINTED FILE IS THE CORRECT SIZE WITH A CREDIT CARDCheck that the printed PDF file is the right size with your credit card or a card that has the same size as a credit card. Place the card in between the two arrows on the upper right-hand side of the paper. If the card fits perfectly in between the arrows you know that the printed PDF is the right size.
STEP 3: CUT OUT THE MEASURING RULERCut out the measuring stick from your printed measuring guide.
STEP 4: CUT THE DOTTED LINEMake a short cut on the dotted line. Make sure not to cut all the way through, just enough to leave a hole in the paper. To make it easier you can fold the paper in half and cut on the dotted line.
STEP 5: PULL THE THINNER END THROUGH THE HOLEPull the thinner end of the cut-out ruler through the hole in the paper, so you create a loop with the paper. Make sure that you have the number on the outside so you can read your size.
STEP 6: SET THE PAPER LOOP ON YOUR FINGER AND TIGHTEN IT UPSet the paper loop on your finger, close to your knuckle or where you want the ring to sit. Tighten the loop by pulling the thinner paper end until you feel that it's the correct ring size. You find the ring size number printed on the paper that comes out of the loop. The correct ring size number is the number printed on the line closest to the paper cut hole.
STEP 7: COMPARE THE SIZE NUMBER WITH THE RING SIZE ON THE PRINTED PDFCompare the printed size number on the cut-out ruler with the ring size on the printed pdf. You find the ring size listed under the circles with the printed size numbers inside.EU DIAMETER CIRCUMFERENCE 50 15.8 mm 49.6 mm 52 16.5 mm 51.8 mm 54 17.2 mm 54 mm 56.5 18.2 mm 57.2 mm 60 19.1 mm 60 mm 62 19.8 mm 62.2 mm 64.5 20.6 mm 64.8 mm 68 21.6 mm 67.9 mm 70 22.3 mm 70.1 mm
1: OPEN AND PRINT PDF IN 100% SCALEStart with opening the pdf file which you find when clicking the 'Ring Measuring PDF'. Make sure the pdf is scaled 100% and then print it. Ring Measuring PDF
2: CHECK THE PRINTED FILE IS THE CORRECT SIZE WITH A CREDIT CARDCheck that the printed PDF file is the right size with your credit card or a card that has the same size as a credit card. Place the card in between the two arrows on the upper right-hand side of the paper. If the card fits perfectly in between the arrows you know that the printed PDF is the right size.
3: CUT OUT THE MEASURING RULERCut out the measuring stick from your printed measuring guide.
4: CUT THE DOTTED LINEMake a short cut on the dotted line. Make sure not to cut all the way through, just enough to leave a hole in the paper. To make it easier you can fold the paper in half and cut on the dotted line.
5: PULL THE THINNER END THROUGH THE HOLEPull the thinner end of the cut-out ruler through the hole in the paper, so you create a loop with the paper. Make sure that you have the number on the outside so you can read your size.
6: SET THE PAPER LOOP ON YOUR FINGER AND TIGHTEN IT UPSet the paper loop on your finger, close to your knuckle or where you want the ring to sit. Tighten the loop by pulling the thinner paper end until you feel that it's the correct ring size. You find the ring size number printed on the paper that comes out of the loop. The correct ring size number is the number printed on the line closest to the paper cut hole.
7: COMPARE THE SIZE NUMBER WITH THE RING SIZE ON THE PRINTED PDFCompare the printed size number on the cut-out ruler with the ring size on the printed pdf. You find the ring size listed under the circles with the printed size numbers inside.
Reviews (60)
M**io M**ias
Dec 22, 2022
M**akiia J**nson
Dec 14, 2022
x**boy
Nov 20, 2022
A**rew
Nov 17, 2022
D**ny
Oct 02, 2022
L**th A**d
Jul 15, 2022
J**n
Jul 06, 2022
f**ymi p**ez
Jun 15, 2022
K**e S**nes
Apr 21, 2022
N**e
Mar 15, 2022
APORRO
- 1
- 2
- 3
You May ALSO Like
New Drops
- Opens in a new window.