Custom Classic Moissanite Stud Earring

Name: Custom Classic Moissanite Stud Earring
Brand: Aporro Brand
SKU: E22028SMW00+E22028SMW00
Price: 109.0 USD
Availability: InStock
Rating: 0.0 (0 reviews)

$109.00

Necklace
Bracelet
Ring

NECKLACES VARY BY LENGTH AND CAN BE CHOSEN TO REFLECT PERSONAL PREFERENCE OR STYLE.

* For Chokers, Add Two Inches To Whatever Your Neck Measurement Is For A Comfortable Fit.

* Adding Four Inches To Your Neck Measurement Will Give You A Good Length For An Average Necklace, Like A Pendant.
SHOP NECKLACE>>>

INCH	CM
6	15
6.5	17
7	18
7.5	19
8	20
8.5	22
9	23
9.5	24
10	25

CHOOSING A BRACELET SIZE USING ANOTHER BRACELET

CHOOSING A BRACELET SIZE BY MEASURING YOUR WRIST

HOW TO USE THE APORRO WRIST SIZER

STEP 1: OPEN AND PRINT PDF IN 100% SCALE

Start with opening the pdf file which you find when clicking the 'Bracelet Measuring PDF'. Make sure the pdf is scaled 100% and then print it.
Bracelet Measuring PDF

STEP 2: CHECK THE PRINTED FILE IS THE CORRECT SIZE WITH A CREDIT CARD

Check that the printed PDF file is the right size with your credit card or a card that has the same size as a credit card. Place the card in between the two arrows on the upper right-hand side of the paper. If the card fits perfectly in between the arrows you know that the printed PDF is the right size.

STEP 3: CUT OUT THE MEASURING RULER

Cut out the measuring stick from your printed measuring guide.

STEP 4: CUT THE DOTTED LINE

Make a short cut on the dotted line. Make sure not to cut all the way through, just enough to leave a hole in the paper. To make it easier you can fold the paper in half and cut on the dotted line.

STEP 5: PULL THE THINNER END THROUGH THE HOLE

Pull the thinner end of the cut-out ruler through the hole in the paper, so you create a loop with the paper. Make sure that you have the number on the outside so you can read your size.

STEP 6: SET THE PAPER LOOP ON YOUR WRIST AND TIGHTEN IT UP

Set the paper loop on your wrist, Tighten the loop by pulling the thinner paper end until you feel that it's the correct ring size.

STEP 7: CHOOSE THE RIGHT SIZE

After sizing ,To ensure the bracelet fits comfortably, add 1.5 cm. You can then add or subtract centimetres according to whether you prefer a loose, exact or tight fit.

Size Type:

US	DIAMETER	CIRCUMFERENCE
5	15.8 mm	49.6 mm
6	16.5 mm	51.8 mm
7	17.2 mm	54 mm
8	18.2 mm	57.2 mm
9	19.1 mm	60 mm
10	19.8 mm	62.2 mm
11	20.6 mm	64.8 mm
12	21.6 mm	67.9 mm
13	22.3 mm	70.1 mm

MEASURE WITH CUT OUT RULER

STEP 1: OPEN AND PRINT PDF IN 100% SCALE

Start with opening the pdf file which you find when clicking the 'Ring Measuring PDF'. Make sure the pdf is scaled 100% and then print it.
Ring Measuring PDF

STEP 2: CHECK THE PRINTED FILE IS THE CORRECT SIZE WITH A CREDIT CARD

STEP 3: CUT OUT THE MEASURING RULER

Cut out the measuring stick from your printed measuring guide.

STEP 4: CUT THE DOTTED LINE

Make a short cut on the dotted line. Make sure not to cut all the way through, just enough to leave a hole in the paper. To make it easier you can fold the paper in half and cut on the dotted line.

STEP 5: PULL THE THINNER END THROUGH THE HOLE

Pull the thinner end of the cut-out ruler through the hole in the paper, so you create a loop with the paper. Make sure that you have the number on the outside so you can read your size.

STEP 6: SET THE PAPER LOOP ON YOUR FINGER AND TIGHTEN IT UP

Set the paper loop on your finger, close to your knuckle or where you want the ring to sit. Tighten the loop by pulling the thinner paper end until you feel that it's the correct ring size. You find the ring size number printed on the paper that comes out of the loop. The correct ring size number is the number printed on the line closest to the paper cut hole.

STEP 7: COMPARE THE SIZE NUMBER WITH THE RING SIZE ON THE PRINTED PDF

Compare the printed size number on the cut-out ruler with the ring size on the printed pdf. You find the ring size listed under the circles with the printed size numbers inside.

MEASURE WITH PRINTED PDF

MEASURE WITH A MEASURING TAPE

EU	DIAMETER	CIRCUMFERENCE
50	15.8 mm	49.6 mm
52	16.5 mm	51.8 mm
54	17.2 mm	54 mm
56.5	18.2 mm	57.2 mm
60	19.1 mm	60 mm
62	19.8 mm	62.2 mm
64.5	20.6 mm	64.8 mm
68	21.6 mm	67.9 mm
70	22.3 mm	70.1 mm

MEASURE WITH CUT OUT RULER

1: OPEN AND PRINT PDF IN 100% SCALE

Start with opening the pdf file which you find when clicking the 'Ring Measuring PDF'. Make sure the pdf is scaled 100% and then print it.
Ring Measuring PDF

2: CHECK THE PRINTED FILE IS THE CORRECT SIZE WITH A CREDIT CARD

3: CUT OUT THE MEASURING RULER

Cut out the measuring stick from your printed measuring guide.

4: CUT THE DOTTED LINE

Make a short cut on the dotted line. Make sure not to cut all the way through, just enough to leave a hole in the paper. To make it easier you can fold the paper in half and cut on the dotted line.

5: PULL THE THINNER END THROUGH THE HOLE

Pull the thinner end of the cut-out ruler through the hole in the paper, so you create a loop with the paper. Make sure that you have the number on the outside so you can read your size.

6: SET THE PAPER LOOP ON YOUR FINGER AND TIGHTEN IT UP

7: COMPARE THE SIZE NUMBER WITH THE RING SIZE ON THE PRINTED PDF

Compare the printed size number on the cut-out ruler with the ring size on the printed pdf. You find the ring size listed under the circles with the printed size numbers inside.

MEASURE WITH PRINTED PDF

MEASURE WITH A MEASURING TAPE

Made to order: 7-14 days for the production

365-Day Warranty

sales@aporro.com

@aporrobrand

+1 626 206 8097

ADDITIONAL SERVICE

A 2-Year warranty

For complete warranty information, click here >>

$99.00

Add To Cart

DESCRIPTION

Traditional handcrafted classic style stud with claw setting highlights the sparkle and brilliance of the VVS quality moissanite stones. The base is made with 925 sterling silver, Nickel, and is lead-free. Safe for all types. 100% Hand-set.

Material: 925 sterling silver

Material Finish: White Gold Plating/14K Gold Plating

Size: 4.5mm/5mm/7mm

Stone Type: Moissanite

Stone Carat Weight: 0.35ct/0.47ct/1.18ct (single)

Stone Quality： VVS

Stone setting: Claw setting

Weight：0.8g/1.0/1.6g (single)

Brand: APORRO

EXCHANGES & RETURNS

SHIPPING

How do I know when my order has shipped?

When you complete your purchase, you can view your real-time logistics information with your tracking number or mobile/order number. Click here to check your logistics information.

TRACK YOUR ORDER

How long does the shipping and processing take?

How much is shipping/taxes?

Why is the tracking number not working?

Why was my package returned?

ORDER & PAYMENT

What methods of payment are accepted?

The following methods of payment are accepted:

All major credit/debit cards such as: Visa, MasterCard, American Express, Discover, etc…

PayPal

Why was my payment declined?

How do I change/modify my order?

How do I cancel my order and get a refund?

Necklace
Bracelet
Ring

NECKLACES VARY BY LENGTH AND CAN BE CHOSEN TO REFLECT PERSONAL PREFERENCE OR STYLE.

* For Chokers, Add Two Inches To Whatever Your Neck Measurement Is For A Comfortable Fit.

* Adding Four Inches To Your Neck Measurement Will Give You A Good Length For An Average Necklace, Like A Pendant.
SHOP NECKLACE>>>

INCH	CM
6	15
6.5	17
7	18
7.5	19
8	20
8.5	22
9	23
9.5	24
10	25

CHOOSING A BRACELET SIZE USING ANOTHER BRACELET

CHOOSING A BRACELET SIZE BY MEASURING YOUR WRIST

HOW TO USE THE APORRO WRIST SIZER

STEP 1: OPEN AND PRINT PDF IN 100% SCALE

Start with opening the pdf file which you find when clicking the 'Bracelet Measuring PDF'. Make sure the pdf is scaled 100% and then print it.
Bracelet Measuring PDF

STEP 2: CHECK THE PRINTED FILE IS THE CORRECT SIZE WITH A CREDIT CARD

STEP 3: CUT OUT THE MEASURING RULER

Cut out the measuring stick from your printed measuring guide.

STEP 4: CUT THE DOTTED LINE

Make a short cut on the dotted line. Make sure not to cut all the way through, just enough to leave a hole in the paper. To make it easier you can fold the paper in half and cut on the dotted line.

STEP 5: PULL THE THINNER END THROUGH THE HOLE

Pull the thinner end of the cut-out ruler through the hole in the paper, so you create a loop with the paper. Make sure that you have the number on the outside so you can read your size.

STEP 6: SET THE PAPER LOOP ON YOUR WRIST AND TIGHTEN IT UP

Set the paper loop on your wrist, Tighten the loop by pulling the thinner paper end until you feel that it's the correct ring size.

STEP 7: CHOOSE THE RIGHT SIZE

After sizing ,To ensure the bracelet fits comfortably, add 1.5 cm. You can then add or subtract centimetres according to whether you prefer a loose, exact or tight fit.

Size Type:

US	DIAMETER	CIRCUMFERENCE
5	15.8 mm	49.6 mm
6

Recover password

Create my account

PREMIUM®

CUSTOM INQUIRY

PENDANTS

CHAINS

BRACELETS

EARRINGS

RINGS

GRILLZ

Custom Classic Moissanite Stud Earring