DESCRIPTION
Aporro brings 3-prong setting to the lastest tennis chain. 3-prong design can hold the gems high and let the light sway down from all directions, so that the gems can show their beauty and nobility in all directions.
Material: Brass with a gold plating
Length(inch): 18''/20''
Width(mm): 5mm
Weight(g): approximately 53.7g (20'')
Stone type: Cubic Zirconia stones
Brand: APORRO
EXCHANGES & RETURNS
SHIPPING
ORDER & PAYMENT
-
NECKLACES VARY BY LENGTH AND CAN BE CHOSEN TO REFLECT PERSONAL PREFERENCE OR STYLE.* For Chokers, Add Two Inches To Whatever Your Neck Measurement Is For A Comfortable Fit.SHOP NECKLACE>>>
* Adding Four Inches To Your Neck Measurement Will Give You A Good Length For An Average Necklace, Like A Pendant. -
INCH CM 6 15 6.5 17 7 18 7.5 19 8 20 8.5 22 9 23 9.5 24 10 25 US DIAMETER CIRCUMFERENCE 5 15.8 mm 49.6 mm 6 16.5 mm 51.8 mm 7 17.2 mm 54 mm 8 18.2 mm 57.2 mm 9 19.1 mm 60 mm 10 19.8 mm 62.2 mm 11 20.6 mm 64.8 mm 12 21.6 mm 67.9 mm 13 22.3 mm 70.1 mm 
STEP 1: OPEN AND PRINT PDF IN 100% SCALEStart with opening the pdf file which you find when clicking the 'Ring Measuring PDF'. Make sure the pdf is scaled 100% and then print it. Ring Measuring PDF
STEP 2: CHECK THE PRINTED FILE IS THE CORRECT SIZE WITH A CREDIT CARDCheck that the printed PDF file is the right size with your credit card or a card that has the same size as a credit card. Place the card in between the two arrows on the upper right-hand side of the paper. If the card fits perfectly in between the arrows you know that the printed PDF is the right size.
STEP 3: CUT OUT THE MEASURING RULERCut out the measuring stick from your printed measuring guide.
STEP 4: CUT THE DOTTED LINEMake a short cut on the dotted line. Make sure not to cut all the way through, just enough to leave a hole in the paper. To make it easier you can fold the paper in half and cut on the dotted line.
STEP 5: PULL THE THINNER END THROUGH THE HOLEPull the thinner end of the cut-out ruler through the hole in the paper, so you create a loop with the paper. Make sure that you have the number on the outside so you can read your size.
STEP 6: SET THE PAPER LOOP ON YOUR FINGER AND TIGHTEN IT UPSet the paper loop on your finger, close to your knuckle or where you want the ring to sit. Tighten the loop by pulling the thinner paper end until you feel that it's the correct ring size. You find the ring size number printed on the paper that comes out of the loop. The correct ring size number is the number printed on the line closest to the paper cut hole.
STEP 7: COMPARE THE SIZE NUMBER WITH THE RING SIZE ON THE PRINTED PDFCompare the printed size number on the cut-out ruler with the ring size on the printed pdf. You find the ring size listed under the circles with the printed size numbers inside.EU DIAMETER CIRCUMFERENCE 50 15.8 mm 49.6 mm 52 16.5 mm 51.8 mm 54 17.2 mm 54 mm 56.5 18.2 mm 57.2 mm 60 19.1 mm 60 mm 62 19.8 mm 62.2 mm 64.5 20.6 mm 64.8 mm 68 21.6 mm 67.9 mm 70 22.3 mm 70.1 mm
1: OPEN AND PRINT PDF IN 100% SCALEStart with opening the pdf file which you find when clicking the 'Ring Measuring PDF'. Make sure the pdf is scaled 100% and then print it. Ring Measuring PDF
2: CHECK THE PRINTED FILE IS THE CORRECT SIZE WITH A CREDIT CARDCheck that the printed PDF file is the right size with your credit card or a card that has the same size as a credit card. Place the card in between the two arrows on the upper right-hand side of the paper. If the card fits perfectly in between the arrows you know that the printed PDF is the right size.
3: CUT OUT THE MEASURING RULERCut out the measuring stick from your printed measuring guide.
4: CUT THE DOTTED LINEMake a short cut on the dotted line. Make sure not to cut all the way through, just enough to leave a hole in the paper. To make it easier you can fold the paper in half and cut on the dotted line.
5: PULL THE THINNER END THROUGH THE HOLEPull the thinner end of the cut-out ruler through the hole in the paper, so you create a loop with the paper. Make sure that you have the number on the outside so you can read your size.
6: SET THE PAPER LOOP ON YOUR FINGER AND TIGHTEN IT UPSet the paper loop on your finger, close to your knuckle or where you want the ring to sit. Tighten the loop by pulling the thinner paper end until you feel that it's the correct ring size. You find the ring size number printed on the paper that comes out of the loop. The correct ring size number is the number printed on the line closest to the paper cut hole.
7: COMPARE THE SIZE NUMBER WITH THE RING SIZE ON THE PRINTED PDFCompare the printed size number on the cut-out ruler with the ring size on the printed pdf. You find the ring size listed under the circles with the printed size numbers inside.
BUY NOW, PAY LATER
· NO INTEREST OR FEES
· FREE DELIVERY - GET IT NEXT DAY
· FREE RETURNS/EXCHANGES
DETAILS MATTER
Quality guaranteed. Each and every piece is handcrafted with the finest materials. The perfect fusion of traditional jewelry and street styles.
TRUSTED BY MEGA CELEBRITIES
PREMIUM JEWELER TRUSTED BY MEGA CELEBRITIES LIKE BILLIE EILISH, TYGA, DWYANE WADE, MACHINE GUN KELLY & MORE.
Reviews (11)
V**tor R**io
Mar 11, 2023
K**in L**
Nov 23, 2022
V**tor
Nov 18, 2022
b**jamin w**liams
Jul 12, 2022
D**uan D**son
May 19, 2022
APORRO
J**esii
May 14, 2022
APORRO
K**nyG
Mar 28, 2022
APORRO
B**ah J**nson
Feb 16, 2022
APORRO
A**er
A**er
- 1
- 2
- 3
You May ALSO Like
New Drops
- Opens in a new window.